3D Printer Filament Dry Box Storage Hot-Air Heating Printing Material Holder Moisture- for All FDM

How to use:<br>1. Put the desiccant, thermometer, and material shaft into the bottom.<br>2. Load the consumables<br>3. Pass the guide tube through the outlet hole<br>4. Pass the wire through the guide tube and cover the lid<br>Note: The product does not include desiccant, which needs to be prepared by yourself.<br>The electronic thermometer does not include batteries, and the battery model is LR44.Supplies in the picture are not included<br>Colour:Transparent<br>Material:PP+ABS<br><br>Package Contents:<br>1 x Drying box<br>1 x Electronic thermohygrometer(without battery)<br>1 x Guide Tube<br>2 x Feed Shaft<br>4 x Bearing<br>1 set x Spare Rubber Plug<br><br>Only the above package content, other products are not included.<br>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

• Airticht and Moisture- Real-time Monitoring Fullytransparent desicn.
• The maximum thickness of the compatible material tray is 79mm, and the maximum diameter of the compatible material tray is 210mm.
• Store the consumables in a dry place to prevent printing problems such as drawing, plugging, and caused by moisture in the consumables.